commit 0b9f4cdd4d75131d8886b919bbf6e0c98906d36e Author: Ben Hutchings Date: Tue Feb 13 18:42:38 2018 +0000 Linux 3.16.54 commit 748165213beda6f96381357327ad461f70c7b881 Author: Lepton Wu Date: Tue Jan 16 15:19:14 2018 +0100 kaiser: Set _PAGE_NX only if supported This finally resolve crash if loaded under qemu + haxm. Haitao Shan pointed out that the reason of that crash is that NX bit get set for page tables. It seems we missed checking if _PAGE_NX is supported in kaiser_add_user_map Link: https://www.spinics.net/lists/kernel/msg2689835.html Reviewed-by: Guenter Roeck Signed-off-by: Lepton Wu Signed-off-by: Greg Kroah-Hartman (backported from Greg K-H's 4.4 stable-queue) Signed-off-by: Juerg Haefliger Signed-off-by: Ben Hutchings commit 8c88582f4d3c3052f03e394c3d1b4af6744ed8d8 Author: Guenter Roeck Date: Tue Jan 16 15:19:13 2018 +0100 kaiser: Set _PAGE_NX only if supported This resolves a crash if loaded under qemu + haxm under windows. See https://www.spinics.net/lists/kernel/msg2689835.html for details. Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that the same log is also seen with vanilla v4.4.110-rc1). [ 0.712750] Freeing unused kernel memory: 552K [ 0.721821] init: Corrupted page table at address 57b029b332e0 [ 0.722761] PGD 80000000bb238067 PUD bc36a067 PMD bc369067 PTE 45d2067 [ 0.722761] Bad pagetable: 000b [#1] PREEMPT SMP [ 0.722761] Modules linked in: [ 0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] task: ffff8800bc290000 ti: ffff8800bc28c000 task.ti: ffff8800bc28c000 [ 0.722761] RIP: 0010:[] [] __clear_user+0x42/0x67 [ 0.722761] RSP: 0000:ffff8800bc28fcf8 EFLAGS: 00010202 [ 0.722761] RAX: 0000000000000000 RBX: 00000000000001a4 RCX: 00000000000001a4 [ 0.722761] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000057b029b332e0 [ 0.722761] RBP: ffff8800bc28fd08 R08: ffff8800bc290000 R09: ffff8800bb2f4000 [ 0.722761] R10: ffff8800bc290000 R11: ffff8800bb2f4000 R12: 000057b029b332e0 [ 0.722761] R13: 0000000000000000 R14: 000057b029b33340 R15: ffff8800bb1e2a00 [ 0.722761] FS: 0000000000000000(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 [ 0.722761] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.722761] CR2: 000057b029b332e0 CR3: 00000000bb2f8000 CR4: 00000000000006e0 [ 0.722761] Stack: [ 0.722761] 000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c [ 0.722761] ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000 [ 0.722761] ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 [ 0.722761] Call Trace: [ 0.722761] [] clear_user+0x2e/0x30 [ 0.722761] [] load_elf_binary+0xa7f/0x18f7 [ 0.722761] [] search_binary_handler+0x86/0x19c [ 0.722761] [] do_execveat_common.isra.26+0x909/0xf98 [ 0.722761] [] ? rest_init+0x87/0x87 [ 0.722761] [] do_execve+0x23/0x25 [ 0.722761] [] run_init_process+0x2b/0x2d [ 0.722761] [] kernel_init+0x6d/0xda [ 0.722761] [] ret_from_fork+0x3f/0x70 [ 0.722761] [] ? rest_init+0x87/0x87 [ 0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1 eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17 48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff [ 0.722761] RIP [] __clear_user+0x42/0x67 [ 0.722761] RSP [ 0.722761] ---[ end trace def703879b4ff090 ]--- [ 0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21 [ 0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init [ 0.722761] CPU: 1 PID: 1 Comm: init Tainted: G D 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] 0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004 [ 0.722761] ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9 [ 0.722761] ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000 [ 0.722761] Call Trace: [ 0.722761] [] dump_stack+0x4d/0x63 [ 0.722761] [] ___might_sleep+0x13a/0x13c [ 0.722761] [] __might_sleep+0x9f/0xa6 [ 0.722761] [] down_read+0x20/0x31 [ 0.722761] [] __blocking_notifier_call_chain+0x35/0x63 [ 0.722761] [] blocking_notifier_call_chain+0x14/0x16 [ 0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 0.722761] [] profile_task_exit+0x1a/0x1c [ 0.802309] [] do_exit+0x39/0xe7f [ 0.802309] [] ? vprintk_default+0x1d/0x1f [ 0.802309] [] ? printk+0x57/0x73 [ 0.802309] [] oops_end+0x80/0x85 [ 0.802309] [] pgtable_bad+0x8a/0x95 [ 0.802309] [] __do_page_fault+0x8c/0x352 [ 0.802309] [] ? file_has_perm+0xc4/0xe5 [ 0.802309] [] do_page_fault+0xc/0xe [ 0.802309] [] page_fault+0x22/0x30 [ 0.802309] [] ? __clear_user+0x42/0x67 [ 0.802309] [] ? __clear_user+0x23/0x67 [ 0.802309] [] clear_user+0x2e/0x30 [ 0.802309] [] load_elf_binary+0xa7f/0x18f7 [ 0.802309] [] search_binary_handler+0x86/0x19c [ 0.802309] [] do_execveat_common.isra.26+0x909/0xf98 [ 0.802309] [] ? rest_init+0x87/0x87 [ 0.802309] [] do_execve+0x23/0x25 [ 0.802309] [] run_init_process+0x2b/0x2d [ 0.802309] [] kernel_init+0x6d/0xda [ 0.802309] [] ret_from_fork+0x3f/0x70 [ 0.802309] [] ? rest_init+0x87/0x87 [ 0.830559] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.830559] [ 0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 The crash part of this problem may be solved with the following patch (thanks to Hugh for the hint). There is still another problem, though - with this patch applied, the qemu session aborts with "VCPU Shutdown request", whatever that means. Cc: lepton Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman (cherry picked from commit b33c3c64c4786cd724ccde6fa97c87ada49f6a73 linux-4.4.y) Signed-off-by: Juerg Haefliger Signed-off-by: Ben Hutchings commit e1c86644e072231e67109185a7134bc5b4eb4c99 Author: Andy Lutomirski Date: Thu Dec 10 19:20:21 2015 -0800 x86/vdso: Remove pvclock fixmap machinery commit cc1e24fdb064d3126a494716f22ad4fc39306742 upstream. Signed-off-by: Andy Lutomirski Reviewed-by: Paolo Bonzini Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/4933029991103ae44672c82b97a20035f5c1fe4f.1449702533.git.luto@kernel.org Signed-off-by: Ingo Molnar [bwh: Backported to 3.16: adjust filenames, context] Signed-off-by: Ben Hutchings commit f74b0dbbfcf37abf719d2695308abf4946c5dc07 Author: Ingo Molnar Date: Fri Dec 11 09:01:30 2015 +0100 x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog() commit d51953b0873358d13b189996e6976dfa12a9b59d upstream. This build failure triggers on 64-bit allmodconfig: arch/x86/platform/uv/uv_nmi.c:493:2: error: implicit declaration of function ‘clocksource_touch_watchdog’ [-Werror=implicit-function-declaration] which is caused by recent changes exposing a missing clocksource.h include in uv_nmi.c: cc1e24fdb064 x86/vdso: Remove pvclock fixmap machinery this file got clocksource.h indirectly via fixmap.h - that stealth route of header inclusion is now gone. Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Ben Hutchings commit 957a3d249cb16292a199f73b7138d23ee44ca433 Author: Juerg Haefliger Date: Wed Jan 17 17:22:04 2018 +0100 Revert "x86: kvmclock: Disable use from vDSO if KPTI is enabled" This reverts commit abe3029e4febfa18e4a9562a792465182b3992a0. Signed-off-by: Juerg Haefliger Signed-off-by: Ben Hutchings commit 9f1cf17b701702325fbdd505325562cb79e6d429 Author: Andy Lutomirski Date: Thu Dec 10 19:20:20 2015 -0800 x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap commit dac16fba6fc590fa7239676b35ed75dae4c4cd2b upstream. Signed-off-by: Andy Lutomirski Reviewed-by: Paolo Bonzini Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/9d37826fdc7e2d2809efe31d5345f97186859284.1449702533.git.luto@kernel.org Signed-off-by: Ingo Molnar [bwh: Backported to 3.16: adjust filenames] Signed-off-by: Ben Hutchings commit 99478423f5dc9ac3eb8525255ca2dfd74af329ef Author: Andy Lutomirski Date: Thu Dec 10 19:20:19 2015 -0800 x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader commit 6b078f5de7fc0851af4102493c7b5bb07e49c4cb upstream. The pvclock vdso code was too abstracted to understand easily and excessively paranoid. Simplify it for a huge speedup. This opens the door for additional simplifications, as the vdso no longer accesses the pvti for any vcpu other than vcpu 0. Before, vclock_gettime using kvm-clock took about 45ns on my machine. With this change, it takes 29ns, which is almost as fast as the pure TSC implementation. Signed-off-by: Andy Lutomirski Reviewed-by: Paolo Bonzini Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/6b51dcc41f1b101f963945c5ec7093d72bdac429.1449702533.git.luto@kernel.org Signed-off-by: Ingo Molnar [bwh: Backported to 3.16: - Open-code rdtsc_ordered() - Adjust filename] Signed-off-by: Ben Hutchings commit 4070ed709318608f7beb23d93956fc32d7bf841e Author: Paolo Bonzini Date: Thu Apr 23 13:20:18 2015 +0200 x86: pvclock: Really remove the sched notifier for cross-cpu migrations commit 73459e2a1ada09a68c02cc5b73f3116fc8194b3d upstream. This reverts commits 0a4e6be9ca17c54817cf814b4b5aa60478c6df27 and 80f7fdb1c7f0f9266421f823964fd1962681f6ce. The task migration notifier was originally introduced in order to support the pvclock vsyscall with non-synchronized TSC, but KVM only supports it with synchronized TSC. Hence, on KVM the race condition is only needed due to a bad implementation on the host side, and even then it's so rare that it's mostly theoretical. As far as KVM is concerned it's possible to fix the host, avoiding the additional complexity in the vDSO and the (re)introduction of the task migration notifier. Xen, on the other hand, hasn't yet implemented vsyscall support at all, so we do not care about its plans for non-synchronized TSC. Reported-by: Peter Zijlstra Suggested-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini Signed-off-by: Ben Hutchings commit 7dd297f6f8c233a9b47cbe36837491e8cde74624 Author: Andy Lutomirski Date: Thu Jul 10 18:13:15 2014 -0700 x86, vdso: Move the vvar area before the vdso text commit e6577a7ce99a506b587bcd1d2cd803cb45119557 upstream. Putting the vvar area after the vdso text is rather complicated: it only works of the total length of the vdso text mapping is known at vdso link time, and the linker doesn't allow symbol addresses to depend on the sizes of non-allocatable data after the PT_LOAD segment. Moving the vvar area before the vdso text will allow is to safely map non-allocatable data after the vdso text, which is a nice simplification. Signed-off-by: Andy Lutomirski Link: http://lkml.kernel.org/r/156c78c0d93144ff1055a66493783b9e56813983.1405040914.git.luto@amacapital.net Signed-off-by: H. Peter Anvin Signed-off-by: Ben Hutchings commit 2d3dd21e552ba921a94f6a3498735e264d8351a5 Author: Mauro Carvalho Chehab Date: Sun Jul 27 16:27:27 2014 -0300 cx231xx: Fix the max number of interfaces commit 139d28826b8e2bc7a9232fde0d2f14812914f501 upstream. The max number of interfaces was read from the wrong descriptor. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Ben Hutchings commit 49afc374a23c093faabd155e332c927bf0e69af0 Author: Shuah Khan Date: Thu Dec 7 14:16:50 2017 -0700 usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer commit be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream. stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by: Secunia Research Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings commit 789998181fc4fe5d48d1b95d796e8b62df17c1d9 Author: Shuah Khan Date: Thu Dec 7 14:16:49 2017 -0700 usbip: prevent vhci_hcd driver from leaking a socket pointer address commit 2f2d0088eb93db5c649d2a5e34a3800a8a935fc5 upstream. When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: - usbip port status does not include hub type - Adjust filenames, context, indentation] Signed-off-by: Ben Hutchings commit 61aa1e63c06961e77b6f63823e05af637c1e3acd Author: Shuah Khan Date: Thu Dec 7 14:16:48 2017 -0700 usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input commit c6688ef9f29762e65bce325ef4acd6c675806366 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by: Secunia Research Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings commit 65060ba29cc54b3d5f76ceacf3c820f2087c35e6 Author: Shuah Khan Date: Thu Dec 7 14:16:47 2017 -0700 usbip: fix stub_rx: get_pipe() to validate endpoint number commit 635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 upstream. get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by: Secunia Research Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust filename, context] Signed-off-by: Ben Hutchings commit d848638ac8f13ed35ed1027bfe56d74d2a46beb8 Author: Alexander Popov Date: Thu Apr 28 13:07:22 2016 +0300 usbip: fix NULL pointer dereference on errors commit 8c7003a3b4b4afd3734cdcc39217ef22d78a4a16 upstream. Fix NULL pointer dereference and obsolete comments forgotten when usbip server was converted from an interface driver to a device driver. Signed-off-by: Alexander Popov Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust filenames] Signed-off-by: Ben Hutchings commit 02cbce8576a31df8fca54aaec91ee081076bd79d Author: Takashi Iwai Date: Tue Jan 9 23:11:03 2018 +0100 ALSA: seq: Make ioctls race-free commit b3defb791b26ea0683a93a4f49c77ec45ec96f10 upstream. The ALSA sequencer ioctls have no protection against racy calls while the concurrent operations may lead to interfere with each other. As reported recently, for example, the concurrent calls of setting client pool with a combination of write calls may lead to either the unkillable dead-lock or UAF. As a slightly big hammer solution, this patch introduces the mutex to make each ioctl exclusive. Although this may reduce performance via parallel ioctl calls, usually it's not demanded for sequencer usages, hence it should be negligible. Reported-by: Luo Quan Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Signed-off-by: Takashi Iwai [bwh: Backported to 3.16: ioctl dispatch is done from snd_seq_do_ioctl(); take the mutex and add ret variable there.] Signed-off-by: Ben Hutchings commit c8b61a6ecfb90c7fb4f824df2448b923954de170 Author: Mohamed Ghannam Date: Wed Jan 3 21:06:06 2018 +0000 RDS: null pointer dereference in rds_atomic_free_op commit 7d11f77f84b27cef452cee332f4e469503084737 upstream. set rm->atomic.op_active to 0 when rds_pin_pages() fails or the user supplied address is invalid, this prevents a NULL pointer usage in rds_atomic_free_op() Signed-off-by: Mohamed Ghannam Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit a64a21f6de4faf41b74800275be0552f55e83699 Author: Mohamed Ghannam Date: Tue Jan 2 19:44:34 2018 +0000 RDS: Heap OOB write in rds_message_alloc_sgs() commit c095508770aebf1b9218e77026e48345d719b17c upstream. When args->nr_local is 0, nr_pages gets also 0 due some size calculation via rds_rm_size(), which is later used to allocate pages for DMA, this bug produces a heap Out-Of-Bound write access to a specific memory region. Signed-off-by: Mohamed Ghannam Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit bf101edbb0ad37a6cd970cb98a9f1ae950b719f1 Author: Ben Seri Date: Fri Dec 8 15:14:47 2017 +0100 Bluetooth: Prevent stack info leak from the EFS element. commit 06e7e776ca4d36547e503279aeff996cbb292c16 upstream. In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). This issue has been assigned CVE-2017-1000410 Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: Ben Seri Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings commit d2e769238e6079e1e16c856cc352b0061a111f1d Author: Eric Dumazet Date: Mon Apr 3 10:55:11 2017 -0700 netfilter: xt_TCPMSS: add more sanity tests on tcph->doff commit 2638fd0f92d4397884fd991d8f4925cb3f081901 upstream. Denys provided an awesome KASAN report pointing to an use after free in xt_TCPMSS I have provided three patches to fix this issue, either in xt_TCPMSS or in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible impact. Signed-off-by: Eric Dumazet Reported-by: Denys Fedoryshchenko Signed-off-by: Pablo Neira Ayuso Signed-off-by: Ben Hutchings commit 63aa20e4f4760249339c7771bd7e4a01d82a95ad Author: Viktor Slavkovic Date: Mon Jan 8 10:43:03 2018 -0800 staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl commit 443064cb0b1fb4569fe0a71209da7625129fb760 upstream. A lock-unlock is missing in ASHMEM_SET_SIZE ioctl which can result in a race condition when mmap is called. After the !asma->file check, before setting asma->size, asma->file can be set in mmap. That would result in having different asma->size than the mapped memory size. Combined with ASHMEM_UNPIN ioctl and shrinker invocation, this can result in memory corruption. Signed-off-by: Viktor Slavkovic Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings commit 7a226e18520308821de1a28cf2adf899485281aa Author: Masami Hiramatsu Date: Fri Nov 24 13:56:30 2017 +0900 x86/decoder: Add new TEST instruction pattern commit 12a78d43de767eaf8fb272facb7a7b6f2dc6a9df upstream. The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at :ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by: kbuild test robot Signed-off-by: Masami Hiramatsu Cc: Greg Kroah-Hartman Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Ben Hutchings commit 3a1436bc91ce84e57f0bb7ed44c980398edaa874 Author: Vijendar Mukunda Date: Thu Nov 23 20:07:00 2017 +0530 ALSA: hda: Add Raven PCI ID commit 9ceace3c9c18c67676e75141032a65a8e01f9a7a upstream. This commit adds PCI ID for Raven platform Signed-off-by: Vijendar Mukunda Signed-off-by: Takashi Iwai Signed-off-by: Ben Hutchings commit 492af143eea363f2738ac17663fc16adb147d128 Author: Brian King Date: Fri Nov 17 11:05:49 2017 -0600 i40evf: Use smp_rmb rather than read_barrier_depends commit f72271e2a0ae4277d53c4053f5eed8bb346ba38a upstream. The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with i40evf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit 4bad0df1f1500ebe910e8782324b5f9893e952af Author: Brian King Date: Fri Nov 17 11:05:47 2017 -0600 igb: Use smp_rmb rather than read_barrier_depends commit c4cb99185b4cc96c0a1c70104dc21ae14d7e7f28 upstream. The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igb as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit 017db2ebba7a38fdd13e464746a2b3a28ce129a3 Author: Brian King Date: Fri Nov 17 11:05:46 2017 -0600 igbvf: Use smp_rmb rather than read_barrier_depends commit 1e1f9ca546556e508d021545861f6b5fc75a95fe upstream. The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igbvf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit 9100d3e8c198e8adc76a5a5e402166111db58773 Author: Brian King Date: Fri Nov 17 11:05:45 2017 -0600 ixgbevf: Use smp_rmb rather than read_barrier_depends commit ae0c585d93dfaf923d2c7eb44b2c3ab92854ea9b upstream. The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with ixgbevf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit c07484c7069d927c9960a03bb0fe67f17006ac2f Author: Brian King Date: Fri Nov 17 11:05:44 2017 -0600 i40e: Use smp_rmb rather than read_barrier_depends commit 52c6912fde0133981ee50ba08808f257829c4c93 upstream. The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with i40e as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit fc176a999aa16744414153c8bcc9239613bbf512 Author: Brian King Date: Fri Nov 17 11:05:43 2017 -0600 ixgbe: Fix skb list corruption on Power systems commit 0a9a17e3bb4564caf4bfe2a6783ae1287667d188 upstream. This patch fixes an issue seen on Power systems with ixgbe which results in skb list corruption and an eventual kernel oops. The following is what was observed: CPU 1 CPU2 ============================ ============================ 1: ixgbe_xmit_frame_ring ixgbe_clean_tx_irq 2: first->skb = skb eop_desc = tx_buffer->next_to_watch 3: ixgbe_tx_map read_barrier_depends() 4: wmb check adapter written status bit 5: first->next_to_watch = tx_desc napi_consume_skb(tx_buffer->skb ..); 6: writel(i, tx_ring->tail); The read_barrier_depends is insufficient to ensure that tx_buffer->skb does not get loaded prior to tx_buffer->next_to_watch, which then results in loading a stale skb pointer. This patch replaces the read_barrier_depends with smp_rmb to ensure loads are ordered with respect to the load of tx_buffer->next_to_watch. Signed-off-by: Brian King Acked-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Ben Hutchings commit 7d61a7c596d1ce69d7c34af6474abaf9b6c8f561 Author: Takashi Iwai Date: Tue Nov 21 17:28:06 2017 +0100 ALSA: usb-audio: Add sanity checks in v2 clock parsers commit 0a62d6c966956d77397c32836a5bbfe3af786fc1 upstream. The helper functions to parse and look for the clock source, selector and multiplier unit may return the descriptor with a too short length than required, while there is no sanity check in the caller side. Add some sanity checks in the parsers, at least, to guarantee the given descriptor size, for avoiding the potential crashes. Fixes: 79f920fbff56 ("ALSA: usb-audio: parse clock topology of UAC2 devices") Reported-by: Andrey Konovalov Signed-off-by: Takashi Iwai Signed-off-by: Ben Hutchings commit 1ab62280ff7827969ab1188639d8497ac5db7c67 Author: Takashi Iwai Date: Tue Nov 21 17:00:32 2017 +0100 ALSA: usb-audio: Fix potential out-of-bound access at parsing SU commit f658f17b5e0e339935dca23e77e0f3cad591926b upstream. The usb-audio driver may trigger an out-of-bound access at parsing a malformed selector unit, as it checks the header length only after evaluating bNrInPins field, which can be already above the given length. Fix it by adding the length check beforehand. Fixes: 99fc86450c43 ("ALSA: usb-mixer: parse descriptors with structs") Signed-off-by: Takashi Iwai Signed-off-by: Ben Hutchings commit 9aeaf942b751cfd9f980caf1e7401ba99b3aa960 Author: Takashi Iwai Date: Tue Nov 21 16:55:51 2017 +0100 ALSA: usb-audio: Add sanity checks to FE parser commit d937cd6790a2bef2d07b500487646bd794c039bb upstream. When the usb-audio descriptor contains the malformed feature unit description with a too short length, the driver may access out-of-bounds. Add a sanity check of the header size at the beginning of parse_audio_feature_unit(). Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Andrey Konovalov Signed-off-by: Takashi Iwai Signed-off-by: Ben Hutchings commit 0fcc050bb0d2779684acae316d725ff8568b41a9 Author: Takashi Iwai Date: Tue Nov 21 16:36:11 2017 +0100 ALSA: timer: Remove kernel warning at compat ioctl error paths commit 3d4e8303f2c747c8540a0a0126d0151514f6468b upstream. Some timer compat ioctls have NULL checks of timer instance with snd_BUG_ON() that bring up WARN_ON() when the debug option is set. Actually the condition can be met in the normal situation and it's confusing and bad to spew kernel warnings with stack trace there. Let's remove snd_BUG_ON() invocation and replace with the simple checks. Also, correct the error code to EBADFD to follow the native ioctl error handling. Reported-by: syzbot Signed-off-by: Takashi Iwai Signed-off-by: Ben Hutchings commit 8ec27245b775b6b116eb1f867cbe4a5521bd049b Author: Philip Derrin Date: Tue Nov 14 00:55:26 2017 +0100 ARM: 8721/1: mm: dump: check hardware RO bit for LPAE commit 3b0c0c922ff4be275a8beb87ce5657d16f355b54 upstream. When CONFIG_ARM_LPAE is set, the PMD dump relies on the software read-only bit to determine whether a page is writable. This concealed a bug which left the kernel text section writable (AP2=0) while marked read-only in the software bit. In a kernel with the AP2 bug, the dump looks like this: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M ro x SHD 0xc0600000-0xc0800000 2M ro NX SHD 0xc0800000-0xc4800000 64M RW NX SHD The fix is to check that the software and hardware bits are both set before displaying "ro". The dump then shows the true perms: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M RW x SHD 0xc0600000-0xc0800000 2M RW NX SHD 0xc0800000-0xc4800000 64M RW NX SHD Fixes: ded947798469 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE") Signed-off-by: Philip Derrin Tested-by: Neil Dick Reviewed-by: Kees Cook Signed-off-by: Russell King Signed-off-by: Ben Hutchings commit 1bed0c40af699306c41cfe9e73c43e7c36ae63be Author: John Johansen Date: Fri Nov 17 17:42:42 2017 -0800 apparmor: ensure that undecidable profile attachments fail commit 844b8292b6311ecd30ae63db1471edb26e01d895 upstream. Profiles that have an undecidable overlap in their attachments are being incorrectly handled. Instead of failing to attach the first one encountered is being used. eg. profile A /** { .. } profile B /*foo { .. } have an unresolvable longest left attachment, they both have an exact match on / and then have an overlapping expression that has no clear winner. Currently the winner will be the profile that is loaded first which can result in non-deterministic behavior. Instead in this situation the exec should fail. Fixes: 898127c34ec0 ("AppArmor: functions for domain transitions") Signed-off-by: John Johansen [bwh: Backported to 3.16: - Add 'info' parameter to x_to_profile(), done upstream in commit 93c98a484c49 "apparmor: move exec domain mediation to using labels" - Adjust context] Signed-off-by: Ben Hutchings commit 56a927d593e0b7562972253c5303fec8ce4f2d5e Author: Johannes Berg Date: Tue Oct 17 21:56:01 2017 +0200 nl80211: don't expose wdev->ssid for most interfaces commit 44905265bc155e0237c76c25bf5ddf740d85a8f2 upstream. For mesh, this is simply wrong - there's no SSID, only the mesh ID, so don't expose it at all. For (P2P) client, it's wrong, because it exposes an internal value that's only used when certain APIs are used. For AP, it's actually the only correct case, so leave that. All other interface types shouldn't be setting this anyway, so there it won't change anything. Fixes: b84e7a05f619 ("nl80211: send the NL80211_ATTR_SSID in nl80211_send_iface()") Signed-off-by: Johannes Berg Signed-off-by: Ben Hutchings commit a5cdb35c21b19bcc22b43c5140604c182ae533a4 Author: Xin Long Date: Fri Nov 17 14:27:18 2017 +0800 route: also update fnhe_genid when updating a route cache commit cebe84c6190d741045a322f5343f717139993c08 upstream. Now when ip route flush cache and it turn out all fnhe_genid != genid. If a redirect/pmtu icmp packet comes and the old fnhe is found and all it's members but fnhe_genid will be updated. Then next time when it looks up route and tries to rebind this fnhe to the new dst, the fnhe will be flushed due to fnhe_genid != genid. It causes this redirect/pmtu icmp packet acutally not to be applied. This patch is to also reset fnhe_genid when updating a route cache. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Acked-by: Hannes Frederic Sowa Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit 8741483f17570f513c5c46abb5e5fd777cd3aa50 Author: Xin Long Date: Fri Nov 17 14:27:06 2017 +0800 route: update fnhe_expires for redirect when the fnhe exists commit e39d5246111399dbc6e11cd39fd8580191b86c47 upstream. Now when creating fnhe for redirect, it sets fnhe_expires for this new route cache. But when updating the exist one, it doesn't do it. It will cause this fnhe never to be expired. Paolo already noticed it before, in Jianlin's test case, it became even worse: When ip route flush cache, the old fnhe is not to be removed, but only clean it's members. When redirect comes again, this fnhe will be found and updated, but never be expired due to fnhe_expires not being set. So fix it by simply updating fnhe_expires even it's for redirect. Fixes: aee06da6726d ("ipv4: use seqlock for nh_exceptions") Reported-by: Jianlin Shi Acked-by: Hannes Frederic Sowa Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit d1c9c979215a366b2af14521d44737812d8d9a67 Author: Andreas Rohner Date: Fri Nov 17 15:29:35 2017 -0800 nilfs2: fix race condition that causes file system corruption commit 31ccb1f7ba3cfe29631587d451cf5bb8ab593550 upstream. There is a race condition between nilfs_dirty_inode() and nilfs_set_file_dirty(). When a file is opened, nilfs_dirty_inode() is called to update the access timestamp in the inode. It calls __nilfs_mark_inode_dirty() in a separate transaction. __nilfs_mark_inode_dirty() caches the ifile buffer_head in the i_bh field of the inode info structure and marks it as dirty. After some data was written to the file in another transaction, the function nilfs_set_file_dirty() is called, which adds the inode to the ns_dirty_files list. Then the segment construction calls nilfs_segctor_collect_dirty_files(), which goes through the ns_dirty_files list and checks the i_bh field. If there is a cached buffer_head in i_bh it is not marked as dirty again. Since nilfs_dirty_inode() and nilfs_set_file_dirty() use separate transactions, it is possible that a segment construction that writes out the ifile occurs in-between the two. If this happens the inode is not on the ns_dirty_files list, but its ifile block is still marked as dirty and written out. In the next segment construction, the data for the file is written out and nilfs_bmap_propagate() updates the b-tree. Eventually the bmap root is written into the i_bh block, which is not dirty, because it was written out in another segment construction. As a result the bmap update can be lost, which leads to file system corruption. Either the virtual block address points to an unallocated DAT block, or the DAT entry will be reused for something different. The error can remain undetected for a long time. A typical error message would be one of the "bad btree" errors or a warning that a DAT entry could not be found. This bug can be reproduced reliably by a simple benchmark that creates and overwrites millions of 4k files. Link: http://lkml.kernel.org/r/1509367935-3086-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Andreas Rohner Signed-off-by: Ryusuke Konishi Tested-by: Andreas Rohner Tested-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings commit 0de2c797c84c176f0b9c6fd69a33e4a0e43a6018 Author: NeilBrown Date: Thu Dec 14 15:32:38 2017 -0800 autofs: fix careless error in recent commit commit 302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream. Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was meant to replace an 'if' with a 'switch', but instead added the 'switch' leaving the case in place. Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error") Reported-by: Ben Hutchings Signed-off-by: NeilBrown Cc: Ian Kent Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings commit 76e2147ff7783177bbe1a2d4dc7995a4d53119b3 Author: NeilBrown Date: Fri Nov 17 15:29:13 2017 -0800 autofs: don't fail mount for transient error commit ecc0c469f27765ed1e2b967be0aa17cee1a60b76 upstream. Currently if the autofs kernel module gets an error when writing to the pipe which links to the daemon, then it marks the whole moutpoint as catatonic, and it will stop working. It is possible that the error is transient. This can happen if the daemon is slow and more than 16 requests queue up. If a subsequent process tries to queue a request, and is then signalled, the write to the pipe will return -ERESTARTSYS and autofs will take that as total failure. So change the code to assess -ERESTARTSYS and -ENOMEM as transient failures which only abort the current request, not the whole mountpoint. It isn't a crash or a data corruption, but having autofs mountpoints suddenly stop working is rather inconvenient. Ian said: : And given the problems with a half dozen (or so) user space applications : consuming large amounts of CPU under heavy mount and umount activity this : could happen more easily than we expect. Link: http://lkml.kernel.org/r/87y3norvgp.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown Acked-by: Ian Kent Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings commit 75c2b0e88e9829235fbe658279ebc23c601b486e Author: Peter Zijlstra Date: Fri Nov 17 15:28:04 2017 -0800 lib/int_sqrt: optimize small argument commit 3f3295709edea6268ff1609855f498035286af73 upstream. The current int_sqrt() computation is sub-optimal for the case of small @x. Which is the interesting case when we're going to do cumulative distribution functions on idle times, which we assume to be a random variable, where the target residency of the deepest idle state gives an upper bound on the variable (5e6ns on recent Intel chips). In the case of small @x, the compute loop: while (m != 0) { b = y + m; y >>= 1; if (x >= b) { x -= b; y += m; } m >>= 2; } can be reduced to: while (m > x) m >>= 2; Because y==0, b==m and until x>=m y will remain 0. And while this is computationally equivalent, it runs much faster because there's less code, in particular less branches. cycles: branches: branch-misses: OLD: hot: 45.109444 +- 0.044117 44.333392 +- 0.002254 0.018723 +- 0.000593 cold: 187.737379 +- 0.156678 44.333407 +- 0.002254 6.272844 +- 0.004305 PRE: hot: 67.937492 +- 0.064124 66.999535 +- 0.000488 0.066720 +- 0.001113 cold: 232.004379 +- 0.332811 66.999527 +- 0.000488 6.914634 +- 0.006568 POST: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.876503355@infradead.org Fixes: 30493cc9dddb ("lib/int_sqrt.c: optimize square root algorithm") Signed-off-by: Peter Zijlstra (Intel) Suggested-by: Anshul Garg Acked-by: Linus Torvalds Cc: Davidlohr Bueso Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Will Deacon Cc: Joe Perches Cc: David Miller Cc: Matthew Wilcox Cc: Kees Cook Cc: Michael Davidson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Ben Hutchings commit 88c6656c94e1a38edc01dd6ed59136250b2d83b5 Author: Joshua Watt Date: Tue Nov 7 16:25:47 2017 -0600 NFS: Fix typo in nomigration mount option commit f02fee227e5f21981152850744a6084ff3fa94ee upstream. The option was incorrectly masking off all other options. Signed-off-by: Joshua Watt Signed-off-by: Anna Schumaker Signed-off-by: Ben Hutchings commit 88a3802b8dacc8e5bf02a55c01e4cd8044438f67 Author: Chuck Lever Date: Sun Nov 5 15:45:22 2017 -0500 nfs: Fix ugly referral attributes commit c05cefcc72416a37eba5a2b35f0704ed758a9145 upstream. Before traversing a referral and performing a mount, the mounted-on directory looks strange: dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0 nfs4_get_referral is wiping out any cached attributes with what was returned via GETATTR(fs_locations), but the bit mask for that operation does not request any file attributes. Retrieve owner and timestamp information so that the memcpy in nfs4_get_referral fills in more attributes. Changes since v1: - Don't request attributes that the client unconditionally replaces - Request only MOUNTED_ON_FILEID or FILEID attribute, not both - encode_fs_locations() doesn't use the third bitmask word Fixes: 6b97fd3da1ea ("NFSv4: Follow a referral") Suggested-by: Pradeep Thomas Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker Signed-off-by: Ben Hutchings commit 224cf907e79fdbf852022c665ba7cdcd074fa12f Author: Anna Schumaker Date: Wed Nov 1 15:48:43 2017 -0400 NFS: Avoid RCU usage in tracepoints commit 3944369db701f075092357b511fd9f5755771585 upstream. There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by: Dave Jones Signed-off-by: Anna Schumaker [bwh: Backported to 3.16: Drop changes in nfs4_inode{,_stateid}_callback_event()] Signed-off-by: Ben Hutchings commit 6d6bb1075f86f7344ee2632239aed78ee57502d8 Author: John David Anglin Date: Sat Nov 11 17:11:16 2017 -0500 parisc: Fix validity check of pointer size argument in new CAS implementation commit 05f016d2ca7a4fab99d5d5472168506ddf95e74f upstream. As noted by Christoph Biedl, passing a pointer size of 4 in the new CAS implementation causes a kernel crash. The attached patch corrects the off by one error in the argument validity check. In reviewing the code, I noticed that we only perform word operations with the pointer size argument. The subi instruction intentionally uses a word condition on 64-bit kernels. Nullification was used instead of a cmpib instruction as the branch should never be taken. The shlw pseudo-operation generates a depw,z instruction and it clears the target before doing a shift left word deposit. Thus, we don't need to clip the upper 32 bits of this argument on 64-bit kernels. Tested with a gcc testsuite run with a 64-bit kernel. The gcc atomic code in libgcc is the only direct user of the new CAS implementation that I am aware of. Signed-off-by: John David Anglin Signed-off-by: Helge Deller Signed-off-by: Ben Hutchings commit 40a2cffb858ffbb62e46dc674acfafe0bc00e30e Author: Paolo Bonzini Date: Thu Oct 26 09:13:27 2017 +0200 KVM: SVM: obey guest PAT commit 15038e14724799b8c205beb5f20f9e54896013c3 upstream. For many years some users of assigned devices have reported worse performance on AMD processors with NPT than on AMD without NPT, Intel or bare metal. The reason turned out to be that SVM is discarding the guest PAT setting and uses the default (PA0=PA4=WB, PA1=PA5=WT, PA2=PA6=UC-, PA3=UC). The guest might be using a different setting, and especially might want write combining but isn't getting it (instead getting slow UC or UC- accesses). Thanks a lot to geoff@hostfission.com for noticing the relation to the g_pat setting. The patch has been tested also by a bunch of people on VFIO users forums. Fixes: 709ddebf81cb40e3c36c6109a7892e8b93a09464 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196409 Signed-off-by: Paolo Bonzini Reviewed-by: David Hildenbrand Tested-by: Nick Sarnie Signed-off-by: Radim Krčmář Signed-off-by: Ben Hutchings commit 52dc6a5d1b9986da6e998ebafce1d7c1f9482857 Author: Nadav Amit Date: Thu Sep 18 22:39:44 2014 +0300 KVM: vmx: Inject #GP on invalid PAT CR commit 4566654bb9be9e8864df417bb72ceee5136b6a6a upstream. Guest which sets the PAT CR to invalid value should get a #GP. Currently, if vmx supports loading PAT CR during entry, then the value is not checked. This patch makes the required check in that case. Signed-off-by: Nadav Amit Signed-off-by: Paolo Bonzini Signed-off-by: Ben Hutchings commit 4e83a3da3f02707a86722ee16b616b4cbc8f4f31 Author: Eric Biggers Date: Wed Nov 15 16:38:09 2017 -0800 dm bufio: fix integer overflow when limiting maximum cache size commit 74d4108d9e681dbbe4a2940ed8fdff1f6868184c upstream. The default max_cache_size_bytes for dm-bufio is meant to be the lesser of 25% of the size of the vmalloc area and 2% of the size of lowmem. However, on 32-bit systems the intermediate result in the expression (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100 overflows, causing the wrong result to be computed. For example, on a 32-bit system where the vmalloc area is 520093696 bytes, the result is 1174405 rather than the expected 130023424, which makes the maximum cache size much too small (far less than 2% of lowmem). This causes severe performance problems for dm-verity users on affected systems. Fix this by using mult_frac() to correctly multiply by a percentage. Do this for all places in dm-bufio that multiply by a percentage. Also replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary to the comment is now defined in include/linux/vmalloc.h. Depends-on: 9993bc635 ("sched/x86: Fix overflow in cyc2ns_offset") Fixes: 95d402f057f2 ("dm: add bufio") Signed-off-by: Eric Biggers Signed-off-by: Mike Snitzer Signed-off-by: Ben Hutchings commit 2aef8ebc45835e81f246acb1da93146b53d34d93 Author: Mike Snitzer Date: Tue Nov 14 15:40:52 2017 -0500 dm: discard support requires all targets in a table support discards commit 8a74d29d541cd86569139c6f3f44b2d210458071 upstream. A DM device with a mix of discard capabilities (due to some underlying devices not having discard support) _should_ just return -EOPNOTSUPP for the region of the device that doesn't support discards (even if only by way of the underlying driver formally not supporting discards). BUT, that does ask the underlying driver to handle something that it never advertised support for. In doing so we're exposing users to the potential for a underlying disk driver hanging if/when a discard is issued a the device that is incapable and never claimed to support discards. Fix this by requiring that each DM target in a DM table provide discard support as a prereq for a DM device to advertise support for discards. This may cause some configurations that were happily supporting discards (even in the face of a mix of discard support) to stop supporting discards -- but the risk of users hitting driver hangs, and forced reboots, outweighs supporting those fringe mixed discard configurations. Signed-off-by: Mike Snitzer [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings commit 0cf96c8faa883d0f91c468c23fd98b936b4f2631 Author: Eric W. Biederman Date: Wed Nov 15 22:17:48 2017 -0600 net/sctp: Always set scope_id in sctp_inet6_skb_msgname commit 7c8a61d9ee1df0fb4747879fa67a99614eb62fec upstream. Alexandar Potapenko while testing the kernel with KMSAN and syzkaller discovered that in some configurations sctp would leak 4 bytes of kernel stack. Working with his reproducer I discovered that those 4 bytes that are leaked is the scope id of an ipv6 address returned by recvmsg. With a little code inspection and a shrewd guess I discovered that sctp_inet6_skb_msgname only initializes the scope_id field for link local ipv6 addresses to the interface index the link local address pertains to instead of initializing the scope_id field for all ipv6 addresses. That is almost reasonable as scope_id's are meaniningful only for link local addresses. Set the scope_id in all other cases to 0 which is not a valid interface index to make it clear there is nothing useful in the scope_id field. There should be no danger of breaking userspace as the stack leak guaranteed that previously meaningless random data was being returned. Fixes: 372f525b495c ("SCTP: Resync with LKSCTP tree.") History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reported-by: Alexander Potapenko Tested-by: Alexander Potapenko Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller [bwh: Backported to 3.16: - Adjust context - Add braces] Signed-off-by: Ben Hutchings commit b00eec7d622d8e0934aab207235d79c7b42dbaeb Author: Alexander Potapenko Date: Wed Aug 16 20:16:40 2017 +0200 sctp: fully initialize the IPv6 address in sctp_v6_to_addr() commit 15339e441ec46fbc3bf3486bb1ae4845b0f1bb8d upstream. KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by: Alexander Potapenko Reviewed-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit 15828f7bce82fc15a3a24146db47b034aec5a686 Author: Jason Gunthorpe Date: Wed Jul 30 12:40:53 2014 -0600 sctp: Fixup v4mapped behaviour to comply with Sock API commit 299ee123e19889d511092347f5fc14db0f10e3a6 upstream. The SCTP socket extensions API document describes the v4mapping option as follows: 8.1.15. Set/Clear IPv4 Mapped Addresses (SCTP_I_WANT_MAPPED_V4_ADDR) This socket option is a Boolean flag which turns on or off the mapping of IPv4 addresses. If this option is turned on, then IPv4 addresses will be mapped to V6 representation. If this option is turned off, then no mapping will be done of V4 addresses and a user will receive both PF_INET6 and PF_INET type addresses on the socket. See [RFC3542] for more details on mapped V6 addresses. This description isn't really in line with what the code does though. Introduce addr_to_user (renamed addr_v4map), which should be called before any sockaddr is passed back to user space. The new function places the sockaddr into the correct format depending on the SCTP_I_WANT_MAPPED_V4_ADDR option. Audit all places that touched v4mapped and either sanely construct a v4 or v6 address then call addr_to_user, or drop the unnecessary v4mapped check entirely. Audit all places that call addr_to_user and verify they are on a sycall return path. Add a custom getname that formats the address properly. Several bugs are addressed: - SCTP_I_WANT_MAPPED_V4_ADDR=0 often returned garbage for addresses to user space - The addr_len returned from recvmsg was not correct when returning AF_INET on a v6 socket - flowlabel and scope_id were not zerod when promoting a v4 to v6 - Some syscalls like bind and connect behaved differently depending on v4mapped Tested bind, getpeername, getsockname, connect, and recvmsg for proper behaviour in v4mapped = 1 and 0 cases. Signed-off-by: Neil Horman Tested-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings commit f5966c69a8335142a79c16e01ead11ad8f54929d Author: Vasily Gorbik Date: Wed Nov 15 14:15:36 2017 +0100 s390/disassembler: increase show_code buffer size commit b192571d1ae375e0bbe0aa3ccfa1a3c3704454b9 upstream. Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody". Also replaces 8 spaces with a single tab to reduce the memory footprint. Fixes the following KASAN finding: BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538 Write of size 1 at addr 000000005a4a75a0 by task bash/1282 CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Call Trace: ([<000000000011eeb6>] show_stack+0x56/0x88) [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0 [<00000000004e2994>] print_address_description+0xf4/0x288 [<00000000004e2cf2>] kasan_report+0x13a/0x230 [<0000000000e38ae6>] number+0x3fe/0x538 [<0000000000e3dfe4>] vsnprintf+0x194/0x948 [<0000000000e3ea42>] sprintf+0xa2/0xb8 [<00000000001198dc>] print_insn+0x374/0x500 [<0000000000119346>] show_code+0x4ee/0x538 [<000000000011f234>] show_registers+0x34c/0x388 [<000000000011f2ae>] show_regs+0x3e/0xa8 [<000000000011f502>] die+0x1ea/0x2e8 [<0000000000138f0e>] do_no_context+0x106/0x168 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0 [<000000000090639e>] sysrq_handle_crash+0x46/0x58 ([<0000000000000007>] 0x7) [<00000000009073fa>] __handle_sysrq+0x102/0x218 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100 [<000000000061d67a>] proc_reg_write+0xb2/0x128 [<0000000000520be6>] __vfs_write+0xee/0x368 [<0000000000521222>] vfs_write+0x21a/0x278 [<000000000052156a>] SyS_write+0xda/0x178 [<0000000000e555cc>] system_call+0xc4/0x270 The buggy address belongs to the page: page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00 >000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 ^ 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00 ================================================================== Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings commit 07b01b65e7733f9063165defaeb2d709c8a5d576 Author: Johan Hovold Date: Sat Nov 11 17:29:29 2017 +0100 clk: ti: dra7-atl-clock: fix child-node lookups commit 33ec6dbc5a02677509d97fe36cd2105753f0f0ea upstream. Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Fixes: 660e15519399 ("clk: ti: dra7-atl-clock: Fix of_node reference counting") Cc: Peter Ujfalusi Signed-off-by: Johan Hovold Acked-by: Peter Ujfalusi Signed-off-by: Stephen Boyd Signed-off-by: Ben Hutchings commit 223f341b1c8de5586b084dc0e4ef10598020985c Author: Peter Ujfalusi Date: Fri Mar 11 16:13:32 2016 +0200 clk: ti: dra7-atl-clock: Fix of_node reference counting commit 660e1551939931657808d47838a3f443c0e83fd0 upstream. of_find_node_by_name() will call of_node_put() on the node so we need to get it first to avoid warnings. The cfg_node needs to be put after we have finished processing the properties. Signed-off-by: Peter Ujfalusi Tested-by: Nishanth Menon Signed-off-by: Stephen Boyd Signed-off-by: Ben Hutchings commit e63ac7ca2b879aee79f3fd325622d861a5ab6078 Author: Mark Bloch Date: Thu Nov 2 15:22:26 2017 +0200 IB/mlx4: Increase maximal message size under UD QP commit 5f22a1d87c5315a98981ecf93cd8de226cffe6ca upstream. Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d9215 ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by: Mark Bloch Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Ben Hutchings commit 97141d69b6111cead4710fdfb32b9f8559ad37b2 Author: Majd Dibbiny Date: Mon Oct 30 14:23:13 2017 +0200 IB/mlx5: Assign send CQ and recv CQ of UMR QP commit 31fde034a8bd964a5c7c1a5663fc87a913158db2 upstream. The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Majd Dibbiny Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Ben Hutchings commit 0dea4044c7794a770fccd3644dc3a1de2d4cd239 Author: Jens Axboe Date: Sun Nov 5 09:13:48 2017 -0700 blktrace: fix unlocked access to init/start-stop/teardown commit 1f2cac107c591c24b60b115d6050adc213d10fc0 upstream. sg.c calls into the blktrace functions without holding the proper queue mutex for doing setup, start/stop, or teardown. Add internal unlocked variants, and export the ones that do the proper locking. Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices") Tested-by: Dmitry Vyukov Signed-off-by: Jens Axboe Signed-off-by: Ben Hutchings commit f3f6031fd1a4db8f195e4b57b390b3bb5baa4f14 Author: Waiman Long Date: Wed Sep 20 13:12:20 2017 -0600 blktrace: Fix potential deadlock between delete & sysfs ops commit 5acb3cc2c2e9d3020a4fee43763c6463767f1572 upstream. The lockdep code had reported the following unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#228); lock(&bdev->bd_mutex/1); lock(s_active#228); lock(&bdev->bd_mutex); *** DEADLOCK *** The deadlock may happen when one task (CPU1) is trying to delete a partition in a block device and another task (CPU0) is accessing tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that partition. The s_active isn't an actual lock. It is a reference count (kn->count) on the sysfs (kernfs) file. Removal of a sysfs file, however, require a wait until all the references are gone. The reference count is treated like a rwsem using lockdep instrumentation code. The fact that a thread is in the sysfs callback method or in the ioctl call means there is a reference to the opended sysfs or device file. That should prevent the underlying block structure from being removed. Instead of using bd_mutex in the block_device structure, a new blk_trace_mutex is now added to the request_queue structure to protect access to the blk_trace structure. Suggested-by: Christoph Hellwig Signed-off-by: Waiman Long Acked-by: Steven Rostedt (VMware) Fix typo in patch subject line, and prune a comment detailing how the code used to work. Signed-off-by: Jens Axboe Signed-off-by: Ben Hutchings commit e9546d2629dd45650d9b9035198d7e8ce907e7de Author: Hou Tao Date: Wed Nov 1 15:42:36 2017 +0800 dm: fix race between dm_get_from_kobject() and __dm_destroy() commit b9a41d21dceadf8104812626ef85dc56ee8a60ed upstream. The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [] dm_get_from_kobject+0x34/0x3a [] dm_attr_show+0x2b/0x5e [] ? mutex_lock+0x26/0x44 [] sysfs_kf_seq_show+0x83/0xcf [] kernfs_seq_show+0x23/0x25 [] seq_read+0x16f/0x325 [] kernfs_fop_read+0x3a/0x13f [] __vfs_read+0x26/0x9d [] ? security_file_permission+0x3c/0x44 [] ? rw_verify_area+0x83/0xd9 [] vfs_read+0x8f/0xcf [] ? __fdget_pos+0x12/0x41 [] SyS_read+0x4b/0x76 [