# NAME

Text::ANSI::Fold - Text folding library supporting ANSI terminal sequence and Asian wide characters with prohibition character handling.

# VERSION

Version 2.05

# SYNOPSIS

    use Text::ANSI::Fold qw(ansi_fold);
    ($folded, $remain) = ansi_fold($text, $width, [ option ]);

    use Text::ANSI::Fold;
    my $f = Text::ANSI::Fold->new(width => 80, boundary => 'word');
    $f->configure(ambiguous => 'wide');
    ($folded, $remain) = $f->fold($text);

    use Text::ANSI::Fold;
    while (<>) {
        print join "\n",
            Text::ANSI::Fold->new(width => 40, text => $_)->chops;
    }

    use Text::ANSI::Fold qw(:constants);
    my $fold = Text::ANSI::Fold->new(
        width     => 70,
        boundary  => 'word',
        linebreak => LINEBREAK_ALL,
        runin     => 4,
        runout    => 4,
        );

# DESCRIPTION

Text::ANSI::Fold provides capability to fold a text into two strings
by given width.  Text can include ANSI terminal sequences.  If the
text is divided in the middle of ANSI-effect region, reset sequence is
appended to folded text, and recover sequence is prepended to trimmed
string.

This module also support Unicode Asian full-width and non-spacing
combining characters properly.  Japanese text formatting with
head-or-end of line prohibition character is also supported.  Set
the linebreak mode to enable it.

Use exported **ansi\_fold** function to fold original text, with number
of visual columns you want to cut off the text.

    ($folded, $remain, $w) = ansi_fold($text, $width);

It returns a pair of strings; first one is folded text, and second is
the rest.

Additional third result is the visual width of folded text.  You may
want to know how many columns returned string takes for further
processing.  If the width parameter is negative, it returns string
untouched and the visual width of it.

This function returns at least one character in any situation.  If you
provide Asian wide string and just one column as width, it trims off
the first wide character even if it does not fit to given width.

Default parameter can be set by **configure** class method:

    Text::ANSI::Fold->configure(width => 80, padding => 1);

Then you don't have to pass second argument.

    ($folded, $remain) = ansi_fold($text);

Because second argument is always taken as width, use _undef_ when
using default width with additional parameter:

    ($folded, $remain) = ansi_fold($text, undef, padding => 1);

# OBJECT INTERFACE

You can create an object to hold parameters, which is effective during
object life time.  For example, 

    my $f = Text::ANSI::Fold->new(
        width => 80,
        boundary => 'word',
        );

makes an object folding on word boundaries with 80 columns width.
Then you can use this without parameters.

    $f->fold($text);

Use **configure** method to update parameters:

    $f->configure(padding => 1);

Additional parameter can be specified on each call, and they precede
saved value.

    $f->fold($text, width => 40);

# STRING OBJECT INTERFACE

Fold object can hold string inside by **text** method.

    $f->text("text");

And folded string can be taken by **retrieve** method.  It returns
empty string if nothing remained.

    while ((my $folded = $f->retrieve) ne '') {
        print $folded;
        print "\n" if $folded !~ /\n\z/;
    }

Method **chops** returns chopped string list.  Because **text** method
returns the object itself, you can use **text** and **chops** like this:

    print join "\n", $f->text($text)->chops;

Actually, text can be set by **new** or **configure** method through
**text** option.  Next program just works.

    use Text::ANSI::Fold;
    while (<>) {
        print join "\n",
            Text::ANSI::Fold->new(width => 40, text => $_)->chops;
    }

When using **chops** method, **width** parameter can take array
reference, and chops text into given width list.

    my $fold = Text::ANSI::Fold->new;
    my @list = $fold->text("1223334444")->chops(width => [ 1, 2, 3 ]);
    # return ("1", "22", "333") and keep "4444"

If the width value is 0, it returns empty string.

Negative width value takes all the rest of holded string in
**retrieve** and **chops** method.

# OPTIONS

Option parameter can be specified as name-value list for **ansi\_fold**
function as well as **new** and **configure** method.

    ansi_fold($text, $width, boundary => 'word', ...);

    Text::ANSI::Fold->configure(boundary => 'word');

    my $f = Text::ANSI::Fold->new(boundary => 'word');

    $f->configure(boundary => 'word');

- **width** => _n_, _\[ n, m, ... \]_

    Specify folding width.  Negative value means all the rest.

    Array reference can be specified but works only with **chops** method,
    and retunrs empty string for zero width.

- **boundary** => "word"

    **boundary** option currently takes only "word" as a valid value.  In
    this case, text is folded on word boundary.  This occurs only when
    enough space will be provided to hold the word on next call with same
    width.

- **padding** => _bool_

    If **padding** option is given with true value, margin space is filled
    up with space character.  Default is 0.  Next code fills spaces if the
    given text is shorter than 80.

        ansi_fold($text, 80, padding => 1);

    If an ANSI **Erase Line** sequence is found in the string, color status
    at the position is remembered, and padding string is produced in that
    color.

- **padchar** => _char_

    **padchar** option specifies character used to fill up the remainder of
    given width.

        ansi_fold($text, 80, padding => 1, padchar => '_');

- **ambiguous** => "narrow" or "wide"

    Tells how to treat Unicode East Asian ambiguous characters.  Default
    is "narrow" which means single column.  Set "wide" to tell the module
    to treat them as wide character.

- **keep\_el** => _bool_

    Keep sole ANSI Erase Line sequence or not.  Default is 1.  If not
    true, individual Erase Line sequence is not kept in the result string.
    Erase Line right after RESET sequence is always kept.

- **linebreak** => _mode_
- **runin** => _width_
- **runout** => _width_

    These options specify the behavior of line break handling for Asian
    multi byte characters.  Only Japanese is supported currently.

    If the cut-off text start with space or prohibited characters
    (e.g. closing parenthesis), they are ran-in at the end of current line
    as much as possible.

    If the trimmed text end with prohibited characters (e.g. opening
    parenthesis), they are ran-out to the head of next line, if it fits to
    maximum width.

    Default **linebreak** mode is **LINEBREAK\_NONE** and can be set one of
    those:

        LINEBREAK_NONE
        LINEBREAK_RUNIN
        LINEBREAK_RUNOUT
        LINEBREAK_ALL

    Import-tag **:constants** can be used to access these constants.

    Option **runin** and **runout** is used to set maximum width of moving
    characters.  Default values are both 2.

- **expand** => _bool_
- **tabstop** => _n_

    Enable tab character expansion.  Default tabstop is 8 and can be set
    by **tabstop** option.

# EXAMPLE

Next code implements almost perfect fold command for multi byte
characters with prohibited character handling.

    #!/usr/bin/env perl
    
    use strict;
    use warnings;
    use open IO => 'utf8', ':std';
    
    use Text::ANSI::Fold qw(:constants);
    my $fold = Text::ANSI::Fold->new(
        width     => 70,
        boundary  => 'word',
        linebreak => LINEBREAK_ALL,
        runin     => 4,
        runout    => 4,
        );
    
    $, = "\n";
    while (<>) {
        print $fold->text($_)->chops;
    }

# SEE ALSO

- [App::ansifold](https://metacpan.org/pod/App::ansifold)

    Command line utility using [Text::ANSI::Fold](https://metacpan.org/pod/Text::ANSI::Fold).

- [Text::ANSI::Fold::Util](https://metacpan.org/pod/Text::ANSI::Fold::Util)

    Collection of utilities using [Text::ANSI::Fold](https://metacpan.org/pod/Text::ANSI::Fold) module.

- [App::sdif](https://metacpan.org/pod/App::sdif)

    [Text::ANSI::Fold](https://metacpan.org/pod/Text::ANSI::Fold) was originally implemented in **sdif** command for
    long time, which provide side-by-side view for diff output.  It is
    necessary to process output from **cdif** command which highlight diff
    output using ANSI escape sequences.

- [Text::ANSI::Util](https://metacpan.org/pod/Text::ANSI::Util), [Text::ANSI::WideUtil](https://metacpan.org/pod/Text::ANSI::WideUtil)

    These modules provide a rich set of functions to handle string
    contains ANSI color terminal sequences.  In contrast,
    [Text::ANSI::Fold](https://metacpan.org/pod/Text::ANSI::Fold) provides simple folding mechanism with minimum
    overhead.  Also **sdif** need to process other than SGR (Select Graphic
    Rendition) color sequence, and non-spacing combining characters, those
    are not supported by these modules.

- [https://en.wikipedia.org/wiki/ANSI\_escape\_code](https://en.wikipedia.org/wiki/ANSI_escape_code)

    ANSI escape code definition.

- [https://www.w3.org/TR/2012/NOTE-jlreq-20120403/](https://www.w3.org/TR/2012/NOTE-jlreq-20120403/)

    Requirements for Japanese Text Layout,
    W3C Working Group Note 3 April 2012

- [http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf](http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf)

    Control Functions for Coded Character Sets

# LICENSE

Copyright (C) 2018- Kazumasa Utashiro.

This library is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.

# AUTHOR

- Kazumasa Utashiro
- [https://github.com/kaz-utashiro/Text-ANSI-Fold](https://github.com/kaz-utashiro/Text-ANSI-Fold)